Sale!

1SAM250000R1008 MS116-4.0 Manual Motor Starter

10,390.00 7.5% VAT

MS116-4.0 Manual Motor Starter

SKU: 1SAM250000R1008 Category:

General Information

  • Extended Product Type:
    MS116-4.0
  • Product ID:
    1SAM250000R1008
  • EAN:
    4013614320316
  • Catalog Description:
    MS116-4.0 Manual Motor Starter
  • Long Description:
    The MS116-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Categories

  • Products » Low Voltage Products and Systems » Circuit Breakers » Manual Motor Starters
  • Products » Low Voltage Products and Systems » Control Products » Manual Motor Starters » Manual Motor Starters

Technical

  • Rated Service Short-Circuit Breaking Capacity (Ics):
    (230 V AC) 50 kA
    (400 V AC) 50 kA
    (440 V AC) 6 kA
    (500 V AC) 6 kA
    (690 V AC) 2 kA
  • Rated Ultimate Short-Circuit Breaking Capacity (Icu):
    (230 V AC) 75 kA
    (400 V AC) 75 kA
    (440 V AC) 18 kA
    (500 V AC) 15 kA
    (690 V AC) 3 kA
  • Rated Instantaneous Short-Circuit Current Setting (Ii):
    50 A
  • Setting Range:
    2.5 … 4.0 A
  • Rated Operational Power AC-3 (Pe):
    (400 V) Three Phase 1.5 kW
  • Rated Operational Power AC-3e (Pe):
    (400 V) Three Phase 1.5 kW
  • Rated Operational Voltage:
    Main Circuit 690 V AC
  • Rated Operational Current (Ie):
    4 A
  • Rated Operational Current AC-3 (Ie):
    4 A
  • Rated Operational Current AC-3e (Ie):
    4 A
  • Rated Frequency (f):
    Main Circuit 50 Hz
    Main Circuit 60 Hz
  • Rated Impulse Withstand Voltage (Uimp):
    Main Circuit 6 kV
  • Rated Insulation Voltage (Ui):
    690 V
  • Power Loss:
    at Rated Operating Conditions per Pole 0.7 … 1.8 W
  • Number of Poles:
    3
  • Conventional Free-air Thermal Current (Ith):
    Main Circuit 4 A
  • Degree of Protection:
    Housing IP20
    Main Circuit Terminals IP10
  • Pollution Degree:
    3
  • Electrical Durability:
    100000 cycle
  • Mechanical Durability:
    100000 cycle
  • Terminal Type:
    Screw Terminals
  • Connecting Capacity Main Circuit:
    Flexible with Ferrule 1/2x 0.75 … 2.5 mm²
    Flexible with Insulated Ferrule 1/2x 0.75 … 2.5 mm²
    Flexible 1/2x 0.75 … 2.5 mm²
    Rigid 1/2x 1 … 4 mm²
  • Tightening Torque:
    Main Circuit 0.8 … 1.2 N·m
  • Wire Stripping Length:
    Main Circuit 9 mm
  • Recommended Screw Driver:
    Pozidriv 2
  • Mounting Position:
    Position 1 to 6
  • Mounting on DIN Rail:
    TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
    TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  • Minimum Mounting Distance:
    Electrical Conductive Board, Horizontal – Up to 400 V 0 mm
    Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm
    Electrical Conductive Board, Vertical 75 mm
    Other Device Same Type, Horizontal 0 mm
    Other Device Same Type, Vertical 150 mm
  • Actuator Type:
    Rotary Handle
  • Contact Position Indication:
    ON / OFF
  • Standards:
    IEC/EN 60947-1
    IEC/EN 60947-2
    IEC/EN 60947-4-1
    UL 60947-1
    UL 60947-4-1

Technical UL/CSA

  • Short-Circuit Current Rating (SCCR):
    Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 18 kA
    Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 5 kA
    Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 18 kA
    Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 5 kA
  • Maximum Operating Voltage UL/CSA:
    Main Circuit 600 V AC
  • Ampere Rating UL/CSA:
    4 A
  • Horsepower Rating UL/CSA:
    (200 V AC) Three Phase 0.75 Hp
    (208 V AC) Three Phase 0.75 Hp
    (220 … 240 V AC) Three Phase 1 Hp
    (440 … 480 V AC) Three Phase 2 Hp
    (550 … 600 V AC) Three Phase 3 Hp
  • Full Load Amps Motor Use:
    (200 V AC) Three Phase 4 A
    (208 V AC) Three Phase 4 A
    (220 … 240 V AC) Three Phase 4 A
    (440 … 480 V AC) Three Phase 4 A
    (550 … 600 V AC) Three Phase 3.9 A
  • Locked Rotor Amps:
    (200 V AC) Three Phase 24 A
    (208 V AC) Three Phase 24 A
    (220 … 240 V AC) Three Phase 24 A
    (440 … 480 V AC) Three Phase 24 A
    (550 … 600 V AC) Three Phase 25.6 A
  • General Use Rating UL/CSA:
    (600 V AC) 4 A
  • Connecting Capacity Main Circuit UL/CSA:
    Flexible 1/2x 16-12 AWG
    Stranded 1/2x 16-12 AWG
  • Tightening Torque UL/CSA:
    Main Circuit 10 in·lb

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.