Sale!
Variable Speed Drives
ATV650D45N4 Variable speed drive, ATV650, 45 kW, 400…480V, IP55
Original price was: ₦8,707,043.00.₦6,965,634.40Current price is: ₦6,965,634.40. 7.5% VAT
Variable speed drive, ATV650, 45 kW, 400…480V, IP55
| range of product |
Altivar Process ATV600
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product specific application |
Process and utilities
|
|
| device short name |
ATV650
|
|
| variant |
Standard version
|
|
| product destination |
Synchronous motors
Asynchronous motors |
|
| EMC filter |
Integrated with 150 m conforming to EN/IEC 61800-3 category C3
Integrated with 50 m conforming to EN/IEC 61800-3 category C2 |
|
| IP degree of protection |
IP55 conforming to IEC 60529
IP55 conforming to IEC 61800-5-1 |
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50…60 Hz – 5…5 %
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
380…480 V – 15…10 %
|
|
| motor power kW |
30 kW (heavy duty)
45 kW (normal duty) |
|
| motor power hp |
40 hp heavy duty
60 hp normal duty |
|
| line current |
57.3 A at 480 V (normal duty)
54.8 A at 380 V (heavy duty) 48.3 A at 480 V (heavy duty) 79.8 A at 380 V (normal duty) |
|
| prospective line Isc |
50 kA
|
|
| apparent power |
40.2 kVA at 480 V (heavy duty)
57.4 kVA at 480 V (normal duty) |
|
| continuous output current |
59 A at 4 kHz for heavy duty
87 A at 4 kHz for normal duty |
|
| maximum transient current |
92.3 A during 60 s (heavy duty)
96.8 A during 60 s (normal duty) |
|
| asynchronous motor control profile |
Optimized torque mode
Constant torque standard Optimized torque mode |
|
| synchronous motor control profile |
Synchronous reluctance motor
Permanent magnet motor |
|
| Output frequency |
0.0001…0.5 kHz
|
|
| speed drive output frequency |
0.1…599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
4…12 kHz with derating factor
2…12 kHz adjustable |
|
| safety function |
STO (safe torque off) SIL 3
|
|
| discrete input logic |
16 preset speeds
|
|
| communication port protocol |
Ethernet
Modbus TCP Modbus TCP |
|
| option card |
Slot A: communication module, Profinet
Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45 Slot A: communication module, CANopen SUB-D 9 Slot A: communication module, CANopen screw terminals Slot A/slot B: digital and analog I/O extension module Slot A/slot B: output relay extension module Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link Communication module, BACnet MS/TP Communication module, Ethernet Powerlink Slot A: communication module, Profibus DP V1 |
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| permissible temporary current boost |
1.5 x In during 60 s (heavy duty)
1.1 x In during 60 s (normal duty) |
|
| motor slip compensation |
Adjustable
Automatic whatever the load Can be suppressed Not available in permanent magnet motor law |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01…9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Safe torque off: motor
Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive Thermal protection: motor |
|
| frequency resolution |
Analog input: 0.012/50 Hz
Display unit: 0.1 Hz |
|
| electrical connection |
Line side: screw terminal25…50 mm²/AWG 4…AWG 1
Motor: screw terminal35…50 mm²/AWG 3…AWG 1 Control: removable screw terminals0.5…1.5 mm²/AWG 20…AWG 16 |
|
| connector type |
RJ45 (on the remote graphic terminal) for Modbus serial
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP |
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
10/100 Mbit/s for Ethernet IP/Modbus TCP |
|
| exchange mode |
Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| number of addresses |
1…247 for Modbus serial
|
|
| method of access |
Slave Modbus TCP
|
|
| supply |
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection |
|
| local signalling |
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage 3 LEDs for local diagnostic |
|
| width |
290 mm
|
|
| height |
910 mm
|
|
| depth |
340 mm
|
|
| net weight |
50 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
AI1, AI2, AI3 software-configurable current: 0…20 mA/4…20 mA, impedance: 250 Ohm, resolution 12 bits
AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits |
|
| discrete input number |
8
|
|
| discrete input type |
DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm DI1…DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm |
|
| input compatibility |
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI1…DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
|
| discrete input logic |
Negative logic (sink) (DI1…DI6), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) Positive logic (source) (DI1…DI6), < 5 V (state 0), > 11 V (state 1) |
|
| analogue output number |
2
|
|
| analogue output type |
Software-configurable current AO1, AO2: 0…20 mA, resolution 10 bits
Software-configurable voltage AO1, AO2: 0…10 V DC impedance 470 Ohm, resolution 10 bits |
|
| sampling duration |
5 ms +/- 1 ms (DI5, DI6) – discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) – analog input 10 ms +/- 1 ms (AO1) – analog output 2 ms +/- 0.5 ms (DI1…DI4) – discrete input |
|
| accuracy |
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input |
|
| linearity error |
AO1, AO2: +/- 0.2 % for analog output
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input |
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles |
|
| refresh time |
Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3: 5 mA at 24 V DC
|
|
| maximum switching current |
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC |
|
| isolation |
Between power and control terminals
|
|
| Variable speed drive application selection |
Compressor centrifugal Building – HVAC
|
|
| Motor power range AC-3 |
30…50 kW at 380…440 V 3 phases
|
|
| mounting mode |
Wall mount
|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
Variable Speed DrivesATV12H037M2 Variable speed drive ATV12 – 0.37kW – 0.55hp – 200..240V – 1ph – with heat sink
Original price was: ₦343,898.50.₦275,118.80Current price is: ₦275,118.80. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12PU40M3 Variable speed drive ATV12 – 4kW – 5hp – 3ph – 200..240V – on base plate
Original price was: ₦866,531.25.₦693,225.00Current price is: ₦693,225.00. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12P055M2 Variable speed drive ATV12 – 0.55 kW – 0.75hp – 200..240V – 1ph – on base plate
Original price was: ₦400,359.38.₦320,287.50Current price is: ₦320,287.50. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV212W075N4 Variable speed drive ATV212 – 0.75kW – 1hp – 480V – 3ph – EMC class C2 – IP55
Original price was: ₦1,424,355.50.₦1,139,484.40Current price is: ₦1,139,484.40. 7.5% VAT Add to basket
Reviews
There are no reviews yet.