Sale!
Soft Starters
ATS48M10Y Soft starter for asynchronous motor – ATS48 – 954 A – 208..690 V – 250..900 KW
Original price was: ₦16,835,550.00.₦15,843,121.88Current price is: ₦15,843,121.88. 7.5% VAT
Soft starter for asynchronous motor – ATS48 – 954 A – 208..690 V – 250..900 KW
| range of product |
Altistart 48
|
|
|---|---|---|
| product or component type |
Soft starter
|
|
| product destination |
Asynchronous motors
|
|
| product specific application |
Heavy duty industry and pumps
|
|
| device short name |
ATS48
|
|
| power supply voltage |
208…690 V – 15…10 %
|
|
| motor power kW |
220 kW at 230 V for severe applications
250 kW at 230 V for standard applications 400 kW at 400 V for severe applications 500 kW at 400 V for standard applications 500 kW at 440 V for severe applications 500 kW at 500 V for severe applications 500 kW at 525 V for severe applications 630 kW at 440 V for standard applications 630 kW at 500 V for standard applications 630 kW at 525 V for standard applications 710 kW at 660 V for severe applications 710 kW at 690 V for severe applications 900 kW at 660 V for standard applications 900 kW at 690 V for standard applications |
|
| motor power hp |
1000 hp at 575 V for standard applications
250 hp at 208 V for severe applications 300 hp at 230 V for severe applications 350 hp at 208 V for standard applications 350 hp at 230 V for standard applications 600 hp at 460 V for severe applications 800 hp at 460 V for standard applications 800 hp at 575 V for severe applications |
|
| power dissipation in W |
2225 W for standard applications
2865 W for standard applications |
|
| utilisation category |
AC-53A
|
|
| type of start |
Start with torque control (current limited to 5 In)
|
|
| Icl nominal current |
1000 A for connection in the motor supply line for standard applications
1000 A for connection in the motor supply line for severe applications |
|
| IP degree of protection |
IP00
|
| assembly style |
With heat sink
|
|
|---|---|---|
| function available |
External bypass (optional)
|
|
| power supply voltage limits |
177…759 V
|
|
| power supply frequency |
50…60 Hz – 5…5 %
|
|
| power supply frequency limits |
47.5…63 Hz
|
|
| device connection |
In the motor supply line
|
|
| factory setting current |
954 A
|
|
| [Uc] control circuit voltage |
110 – 15 % to 230 + 10 %, 50/60 Hz
|
|
| control circuit consumption |
80 W
|
|
| discrete output number |
2
|
|
| discrete output type |
(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO |
|
| output absolute accuracy precision |
+/- 5 %
|
|
| minimum switching current |
10 mA at 6 V DC for relay outputs
|
|
| maximum switching current |
Logic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms |
|
| discrete input number |
5
|
|
| discrete input type |
PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm |
|
| discrete input voltage |
24 V <= 30 V
|
|
| discrete input logic |
Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
|
|
| starting current |
0.4…1.3 Icl adjustable
|
|
| analogue output type |
Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
|
|
| communication port protocol |
Modbus
|
|
| connector type |
1 RJ45
|
|
| communication data link |
Serial
|
|
| physical interface |
RS485 multidrop
|
|
| transmission rate |
4800, 9600 or 19200 bps
|
|
| max nodes number |
31
|
|
| protection type |
Phase failure: line
Thermal protection: motor Thermal protection: starter |
|
| marking |
CE
|
|
| type of cooling |
Forced convection
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
890 mm
|
|
| width |
770 mm
|
|
| depth |
315 mm
|
|
| net weight |
115 kg
|
|
| Motor power range AC-3 |
110…220 kW at 200…240 V 3 phases
250…500 kW at 380…440 V 3 phases 250…500 kW at 480…500 V 3 phases 250…500 kW at 200…240 V 3 phases 560…900 kW at 380…440 V 3 phases 560…900 kW at 480…500 V 3 phases |
|
| motor starter type |
Soft starter
|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
Soft StartersATS01N222LU Soft starter for asynchronous motor – ATS01 – 22 A – 200..240 V – 4..5.5 KW
Original price was: ₦487,546.88.₦390,037.50Current price is: ₦390,037.50. 7.5% VAT Add to basket -
Sale!
Soft StartersATS01N206QN Soft starter for asynchronous motor – ATS01
Original price was: ₦342,914.13.₦274,331.30Current price is: ₦274,331.30. 7.5% VAT Add to basket -
Sale!
Soft StartersATS01N109FT Soft starter for asynchronous motor – ATS01avava
Original price was: ₦447,890.63.₦358,312.50Current price is: ₦358,312.50. 7.5% VAT Add to basket -
Sale!
Soft StartersATS22C25Q Soft starter-ATS22-control 220V-power 230V(75kW)/400…440V(132kW)
Original price was: ₦3,670,734.38.₦2,936,587.50Current price is: ₦2,936,587.50. 7.5% VAT Add to basket
Reviews
There are no reviews yet.