Sale!
Variable Speed Drives
ATV950D11N4E Variable speed drive, ATV950, 11kW, 400/480V, w braking unit/switch, IP55
Original price was: ₦4,196,988.25.₦3,357,590.60Current price is: ₦3,357,590.60. 7.5% VAT
Variable speed drive, ATV950, 11kW, 400/480V, w braking unit/switch, IP55
| range of product |
Altivar Process ATV900
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| device application |
Industrial application
|
|
| device short name |
ATV950
|
|
| variant |
With braking chopper
With load break switch |
|
| product destination |
Synchronous motors
Asynchronous motors |
|
| EMC filter |
Integrated with 50 m conforming to EN/IEC 61800-3 category C2
Integrated with 150 m conforming to EN/IEC 61800-3 category C3 |
|
| IP degree of protection |
IP55 conforming to IEC 61800-5-1
IP55 conforming to IEC 60529 |
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50…60 Hz +/- 5 %
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
380…480 V – 15…10 %
|
|
| motor power kW |
11 kW (normal duty)
7.5 kW (heavy duty) |
|
| motor power hp |
15 hp normal duty
10 hp heavy duty |
|
| line current |
19.8 A at 380 V (normal duty)
17 A at 480 V (normal duty) 14.1 A at 380 V (heavy duty) 12.5 A at 480 V (heavy duty) |
|
| prospective line Isc |
50 kA
|
|
| apparent power |
14.1 kVA at 480 V (normal duty)
10.4 kVA at 480 V (heavy duty) |
|
| continuous output current |
23.5 A at 4 kHz for normal duty
16.5 A at 4 kHz for heavy duty |
|
| maximum transient current |
28.2 A during 60 s (normal duty)
24.8 A during 60 s (heavy duty) |
|
| asynchronous motor control profile |
Variable torque standard
Constant torque standard Optimized torque mode |
|
| synchronous motor control profile |
Permanent magnet motor
Synchronous reluctance motor |
|
| speed drive output frequency |
0.1…599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
2…16 kHz adjustable
4…16 kHz with derating factor |
|
| safety function |
STO (safe torque off) SIL 3
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Modbus serial
Ethernet/IP Modbus TCP |
|
| option module |
Slot A: communication module for Profibus DP V1
Slot A: communication module for Profinet Slot A: communication module for DeviceNet Slot A: communication module for EtherCAT Slot A: communication module for CANopen daisy chain RJ45 Slot A: communication module for CANopen SUB-D 9 Slot A: communication module for CANopen screw terminals Slot A/slot B/slot C: digital and analog I/O extension module Slot A/slot B/slot C: output relay extension module Slot B: 5/12 V digital encoder interface module Slot B: analog encoder interface module Slot B: resolver encoder interface module communication module for Ethernet Powerlink |
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Adjustable
Automatic whatever the load Not available in permanent magnet motor law Can be suppressed |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01…9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Thermal protection: motor
Safe torque off: motor Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive |
|
| frequency resolution |
Display unit: 0.1 Hz
Analog input: 0.012/50 Hz |
|
| electrical connection |
Control: screw terminal0.5…1.5 mm²
Line side: screw terminal6 mm² Motor: screw terminal6…10 mm² DC bus: screw terminal6…10 mm² |
|
| connector type |
2 RJ45 for Ethernet IP/Modbus TCP on the control block
1 RJ45 for Modbus serial on the control block |
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
10/100 Mbit/s for Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
|
| exchange mode |
Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| number of addresses |
1…247 for Modbus serial
|
|
| method of access |
Slave Modbus TCP
|
|
| supply |
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
|
| local signalling |
Local diagnostic: 3 LED (mono/dual colour)
Embedded communication status: 5 LED (dual colour) Communication module status: 2 LED (dual colour) Presence of voltage: 1 LED (red) |
|
| width |
264 mm
|
|
| height |
678 mm
|
|
| depth |
330 mm
|
|
| net weight |
13.7 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0…20 mA/4…20 mA, impedance: 250 Ohm, resolution 12 bits |
|
| discrete input number |
10
|
|
| discrete input type |
DI1…DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm |
|
| input compatibility |
DI1…DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
|
| discrete input logic |
Positive logic (source) (DI1…DI8), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1…DI8), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) |
|
| analogue output number |
2
|
|
| analogue output type |
Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1, AQ2: 0…20 mA impedance 500 Ohm, resolution 10 bits |
|
| discrete output number |
2
|
|
| discrete output type |
Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA |
|
| sampling duration |
2 ms +/- 0.5 ms (DI1…DI8) – discrete input
5 ms +/- 1 ms (DI7, DI8) – pulse input 1 ms +/- 1 ms (AI1, AI2, AI3) – analog input 5 ms +/- 1 ms (AQ1, AQ2) – analog output |
|
| accuracy |
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
|
| linearity error |
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AQ1, AQ2: +/- 0.2 % for analog output |
|
| maximum switching current |
Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles |
|
| refresh time |
Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3: 5 mA at 24 V DC
|
|
| isolation |
Between power and control terminals
|
|
| mounting mode |
Wall mount
|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
Variable Speed DrivesATV12HU15M2 Variable speed drive ATV12 – 1.5kW – 2hp – 200..240V – 1ph – with heat sink
Original price was: ₦463,816.38.₦371,053.10Current price is: ₦371,053.10. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12P037M3 Variable speed drive ATV12 – 0.37kW – 0.55hp – 200..240V – 3ph – on base plate
Original price was: ₦391,500.00.₦313,200.00Current price is: ₦313,200.00. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12HU30M3 Variable speed drive ATV12 – 3kW – 200..240V – 3ph – with heat sink
Original price was: ₦703,546.88.₦562,837.50Current price is: ₦562,837.50. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12P075M2 Variable speed drive ATV12 – 0.75kW – 1hp – 200..240V – 1ph – on base plate
Original price was: ₦444,867.25.₦355,893.80Current price is: ₦355,893.80. 7.5% VAT Add to basket
Reviews
There are no reviews yet.