Sale!
Variable Speed Drives
ATV930C16N4F Floor standing drive, ATV930, 160kW, 400/440V, w/o braking unit, IP21
Original price was: ₦40,488,961.00.₦32,391,168.80Current price is: ₦32,391,168.80. 7.5% VAT
Floor standing drive, ATV930, 160kW, 400/440V, w/o braking unit, IP21
| range of product |
Altivar Process ATV900
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| device application |
Industrial application
|
|
| device short name |
ATV930
|
|
| variant |
Standard version
Without braking chopper |
|
| product destination |
Asynchronous motors
Synchronous motors |
|
| EMC filter |
Integrated conforming to EN/IEC 61800-3 category C3
|
|
| IP degree of protection |
IP21 conforming to IEC 61800-5-1
IP21 conforming to IEC 60529 |
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50…60 Hz +/- 5 %
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
380…440 V – 15…10 %
|
|
| motor power kW |
160 kW (normal duty)
132 kW (heavy duty) |
|
| line current |
277 A at 400 V (normal duty)
232 A at 400 V (heavy duty) 291 A at 380 V (normal duty) 244 A at 380 V (heavy duty) |
|
| prospective line Isc |
50 kA
|
|
| apparent power |
192 kVA at 400 V (normal duty)
161 kVA at 400 V (heavy duty) |
|
| continuous output current |
302 A at 2.5 kHz for normal duty
250 A at 2.5 kHz for heavy duty |
|
| maximum transient current |
362 A during 60 s (normal duty)
375 A during 60 s (heavy duty) |
|
| asynchronous motor control profile |
Variable torque standard
Constant torque standard Optimized torque mode |
|
| synchronous motor control profile |
Permanent magnet motor
Synchronous reluctance motor |
|
| speed drive output frequency |
0.1…599 Hz
|
|
| nominal switching frequency |
2.5 kHz
|
|
| switching frequency |
2.5…8 kHz with derating factor
2…8 kHz adjustable |
|
| safety function |
STO (safe torque off) SIL 3
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Modbus TCP
Modbus serial Ethernet/IP |
|
| option module |
Slot A: communication module for Profibus DP V1
Slot A: communication module for Profinet Slot A: communication module for DeviceNet Slot A: communication module for EtherCAT Slot A: communication module for CANopen daisy chain RJ45 Slot A: communication module for CANopen SUB-D 9 Slot A: communication module for CANopen screw terminals Slot A/slot B/slot C: digital and analog I/O extension module Slot A/slot B/slot C: output relay extension module Slot B: 5/12 V digital encoder interface module Slot B: analog encoder interface module Slot B: resolver encoder interface module communication module for Ethernet Powerlink |
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Adjustable
Not available in permanent magnet motor law Can be suppressed Automatic whatever the load |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01…9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Thermal protection: motor
Safe torque off: motor Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive |
|
| frequency resolution |
Display unit: 0.1 Hz
Analog input: 0.012/50 Hz |
|
| electrical connection |
Control: removable screw terminals0.5…1.5 mm²
Line side: M12 bar Motor: M12 bar |
|
| motor recommanded cable cross section |
1 x (3 x 185 mm²) (normal duty)
2 x (3 x 95 mm²) (normal duty) 1 x (3 x 150 mm²) (heavy duty) 2 x (3 x 70 mm²) (heavy duty) |
|
| main supply recommanded cable cross section |
2 x (3 x 70 mm²) (heavy duty)
1 x (3 x 185 mm²) (normal duty) 1 x (3 x 185 mm²) (heavy duty) 2 x (3 x 95 mm²) (normal duty) |
|
| connector type |
2 RJ45 for Ethernet IP/Modbus TCP on the control block
1 RJ45 for Modbus serial on the control block |
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
10/100 Mbit/s for Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
|
| exchange mode |
Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| number of addresses |
1…247 for Modbus serial
|
|
| method of access |
Slave Modbus TCP
|
|
| supply |
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
|
| local signalling |
Local diagnostic: 3 LED (mono/dual colour)
Embedded communication status: 5 LED (dual colour) Communication module status: 2 LED (dual colour) Presence of voltage: 1 LED (red) |
|
| width |
400 mm
|
|
| height |
2150 mm
|
|
| depth |
605 mm
|
|
| net weight |
300 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0…20 mA/4…20 mA, impedance: 250 Ohm, resolution 12 bits |
|
| discrete input number |
10
|
|
| discrete input type |
DI1…DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm |
|
| input compatibility |
DI1…DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
|
| discrete input logic |
Positive logic (source) (DI1…DI8), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1…DI8), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) |
|
| analogue output number |
2
|
|
| analogue output type |
Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1, AQ2: 0…20 mA impedance 500 Ohm, resolution 10 bits |
|
| discrete output number |
2
|
|
| discrete output type |
Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA |
|
| sampling duration |
2 ms +/- 0.5 ms (DI1…DI8) – discrete input
5 ms +/- 1 ms (DI7, DI8) – pulse input 1 ms +/- 1 ms (AI1, AI2, AI3) – analog input 5 ms +/- 1 ms (AQ1, AQ2) – analog output |
|
| accuracy |
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
|
| linearity error |
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AQ1, AQ2: +/- 0.2 % for analog output |
|
| maximum switching current |
Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles |
|
| refresh time |
Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3: 5 mA at 24 V DC
|
|
| isolation |
Between power and control terminals
|
|
| Variable speed drive application selection |
Food and beverage processing Mixer
Food and beverage processing Conveyor Food and beverage processing Shredder Hoisting Process crane Marine Thruster Marine Winch Material working (wood, ceramic, stone, pvc, metal) Press Material working (wood, ceramic, stone, pvc, metal) Extruder Mining mineral and metal Other application Oil and gas Drilling rig Oil and gas Progressive cavity pump Oil and gas Rod pump Oil and gas Swapping pump Oil and gas Compressor for regasification Oil and gas Separator Oil and gas Other application Water and waste water Separator |
|
| power range |
110…220 kW at 380…440 V 3 phases
|
|
| mounting mode |
Floor-standing
|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
Variable Speed DrivesATV12H055M2 Variable speed drive ATV12 – 0.55kW – 0.75hp – 200..240V – 1ph – with heat sink
Original price was: ₦360,773.50.₦288,618.80Current price is: ₦288,618.80. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12PU15M3 Variable speed drive ATV12 – 1.5kW – 2hp – 200..240V – 3ph – on base plate
Original price was: ₦611,683.63.₦489,346.90Current price is: ₦489,346.90. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12PU22M3 Variable speed drive ATV12 – 2.2kW – 3hp – 200..240V – 3ph – on base plate
Original price was: ₦764,578.13.₦611,662.50Current price is: ₦611,662.50. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12P055M2 Variable speed drive ATV12 – 0.55 kW – 0.75hp – 200..240V – 1ph – on base plate
Original price was: ₦400,359.38.₦320,287.50Current price is: ₦320,287.50. 7.5% VAT Add to basket
Reviews
There are no reviews yet.