General Information
-
- Extended Product Type:
- CAL4-11
-
- Product ID:
- 1SBN010120R1011
-
- EAN:
- 3471523130043
-
- Catalog Description:
- CAL4-11 Auxiliary Contact Block
-
- Long Description:
- The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments.
Types of auxiliary contact blocks for front mounting:
• CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts
• CC4 1-pole block, with N.O. leading contact or N.C. lagging contact
• CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face.
Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see “Terminal marking and positioning”).
Types of auxiliary contact blocks for side mounting:
• CAL4 2-pole block, with instantaneous N.O. + N.C. contacts.
For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.
Categories
- Products » Low Voltage Products and Systems » Control Products » Contactors » Block Contactors Accessories
Technical UL/CSA
-
- Tightening Torque UL/CSA:
- Auxiliary Circuit 11 IA
Additional Information
-
- Connecting Capacity Auxiliary Circuit:
- Flexible with Ferrule 1/2x 0.75 … 2.5 mm²
Flexible with Insulated Ferrule 2x 0.75 … 1.5 mm²
Flexible with Insulated Ferrule 1x 0.75 … 2.5 mm²
Rigid 1/2x 1 … 2.5 mm²
-
- Conventional Free-air Thermal Current (Ith):
- acc. to IEC 60947-5-1, q = 40 °C 16 A
-
- Maximum Electrical Switching Frequency:
- (AC-15) 1200 cycles per hour
(DC-13) 900 cycles per hour
-
- Maximum Mechanical Switching Frequency:
- 3600 cycles per hour
-
- Medium Description:
- CAL4-11 Auxiliary Contact Block is a side mounted instantaneous auxiliary contact block for clipping onto the right and/or left-hand side of the contactor. CAL4-11 is a 2-pole block, with 1 N.O. and 1 N.C. contacts.
The auxiliary contact block is equipped with IP20 screw type connecting terminals delivered open.
-
- Mounted Auxiliary Contacts:
- 1 NO, 1 NC
-
- Mounting Type:
- Side Mounting
-
- Number of Auxiliary Contacts NC:
- 1
-
- Number of Auxiliary Contacts NO:
- 1
-
- Order Multiple:
- 1 piece
-
- Product Main Type:
- Accessories for Block Contactors
-
- Product Name:
- Auxiliary Contact Block
-
- Rated Frequency (f):
- Auxiliary Circuit 50 / 60 Hz
-
- Rated Impulse Withstand Voltage (Uimp):
- 6 kV
-
- Rated Insulation Voltage (Ui):
- acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 V
acc. to UL/CSA 600 V
-
- Rated Operational Current AC-15 (Ie):
- (500 V) 2 A
(690 V) 2 A
(24 / 127 V) 6 A
(220 / 240 V) 4 A
(400 / 440 V) 3 A
-
- Rated Operational Current DC-13 (Ie):
- (24 V) 6 A / 144 W
(48 V) 2.8 A / 134 W
(72 V) 1 A / 72 W
(110 V) 0.55 A / 60 W
(125 V) 0.55 A / 69 W
(220 V) 0.27 A / 60 W
(250 V) 0.27 A / 68 W
(400 V) 0.15 A / 60 W
(500 V) 0.13 A / 65 W
(600 V) 0.1 A / 60 W
-
- Rated Operational Voltage:
- Auxiliary Circuit 24 … 690 V
-
- Rated Short-time Withstand Current (Icw):
- for 0.1 s 140 A
for 1 s 100 A -
-
- Terminal Type:
- Screw Terminals
-
- Tightening Torque:
- Auxiliary Circuit 1.2 N·m
-
- Wire Stripping Length:
- Auxiliary Circuit 10 mm
-
Reviews
There are no reviews yet.