Sale!

1SAM350000R1010 MS132-10 Manual Motor Starter

Original price was: ₦35,000.00.Current price is: ₦30,150.00. 7.5% VAT

MS132-10 Manual Motor Starter

Dimensions

  • Product Net Width:
    45 mm
  • Product Net Height:
    90 mm
  • Product Net Depth / Length:
    86.75 mm
  • Product Net Weight:
    0.265 kg

Technical

  • Rated Service Short-Circuit Breaking Capacity (Ics):
    (230 V AC) 100 kA
    (250 V DC) 3 Poles in Series 10 kA
    (400 V AC) 100 kA
    (440 V AC) 30 kA
    (500 V AC) 20 kA
    (690 V AC) 3 kA
  • Rated Ultimate Short-Circuit Breaking Capacity (Icu):
    (230 V AC) 100 kA
    (400 V AC) 100 kA
    (440 V AC) 30 kA
    (500 V AC) 20 kA
    (690 V AC) 3 kA
  • Rated Instantaneous Short-Circuit Current Setting (Ii):
    150 A
  • Setting Range:
    6.3 … 10 A
  • Rated Operational Power AC-3 (Pe):
    (400 V) Three Phase 4 kW
  • Rated Operational Power AC-3e (Pe):
    (400 V) Three Phase 4 kW
  • Rated Operational Voltage:
    Main Circuit 690 V AC
    Main Circuit 250 V DC
  • Rated Operational Current (Ie):
    10 A
  • Rated Operational Current AC-3 (Ie):
    10 A
  • Rated Operational Current AC-3e (Ie):
    10 A
  • Rated Operational Current DC-5 (Ie):
    10 A
  • Rated Frequency (f):
    Main Circuit 50 Hz
    Main Circuit 60 Hz
  • Rated Impulse Withstand Voltage (Uimp):
    Main Circuit 6 kV
  • Rated Insulation Voltage (Ui):
    690 V
  • Power Loss:
    at Rated Operating Conditions per Pole 0.8 … 2.0 W
  • Number of Poles:
    3
  • Conventional Free-air Thermal Current (Ith):
    Main Circuit 10 A
  • Degree of Protection:
    Housing IP20
    Main Circuit Terminals IP10
  • Pollution Degree:
    3
  • Electrical Durability:
    50000 cycle
  • Mechanical Durability:
    100000 cycle
  • Terminal Type:
    Screw Terminals
  • Connecting Capacity Main Circuit:
    Flexible with Ferrule 1/2x 0.75 … 2.5 mm²
    Flexible with Insulated Ferrule 1/2x 0.75 … 2.5 mm²
    Flexible 1/2x 0.75 … 2.5 mm²
    Rigid 1/2x 1 … 4 mm²
  • Tightening Torque:
    Main Circuit 0.8 … 1.2 N·m
  • Wire Stripping Length:
    Main Circuit 9 mm
  • Recommended Screw Driver:
    Pozidriv 2
  • Mounting Position:
    1 … 6
  • Mounting on DIN Rail:
    TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
    TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
  • Minimum Mounting Distance:
    Electrical Conductive Board, Horizontal – Up to 400 V 0 mm
    Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm
    Electrical Conductive Board, Vertical 75 mm
    Other Device Same Type, Horizontal 0 mm
    Other Device Same Type, Vertical 150 mm
  • Actuator Type:
    Rotary Handle
  • Contact Position Indication:
    ON / OFF / TRIP
  • Standards:
    IEC/EN 60947-1
    IEC/EN 60947-2
    IEC/EN 60947-4-1
    UL 60947-1
    UL 60947-4-1
  • Remarks:
    UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx

Technical UL/CSA

  • Short-Circuit Current Rating (SCCR):
    Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA
    Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 18 kA
    Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA
    Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 35 kA
    Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA
    Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 18 kA
    Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA
    Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 18 kA
  • Maximum Operating Voltage UL/CSA:
    Main Circuit 600 V AC
  • Ampere Rating UL/CSA:
    10 A
  • Horsepower Rating UL/CSA:
    (200 V AC) Three Phase 2 Hp
    (208 V AC) Three Phase 2 Hp
    (220 … 240 V AC) Three Phase 3 Hp
    (440 … 480 V AC) Three Phase 5 Hp
    (550 … 600 V AC) Three Phase 7.5 Hp
  • Full Load Amps Motor Use:
    (200 V AC) Three Phase 7.8 A
    (208 V AC) Three Phase 7.5 A
    (220 … 240 V AC) Three Phase 9.6 A
    (440 … 480 V AC) Three Phase 7.6 A
    (550 … 600 V AC) Three Phase 9 A
  • Locked Rotor Amps:
    (200 V AC) Three Phase 57.5 A
    (208 V AC) Three Phase 55 A
    (220 … 240 V AC) Three Phase 64 A
    (440 … 480 V AC) Three Phase 46 A
    (550 … 600 V AC) Three Phase 50.8 A
  • General Use Rating UL/CSA:
    (600 V AC) 10 A
  • Connecting Capacity Main Circuit UL/CSA:
    Flexible 1/2x 16-12 AWG
    Stranded 1/2x 16-12 AWG
  • Tightening Torque UL/CSA:
    Main Circuit 10 … 12 in·lb