range of product |
Altistart 01
|
|
---|---|---|
product or component type |
Soft starter
|
|
product destination |
Asynchronous motors
|
|
product specific application |
Simple machine
|
|
device short name |
ATS01
|
|
network number of phases |
3 phases
|
|
[Us] rated supply voltage |
460…480 V – 10…10 %
|
|
motor power hp |
7.5 hp, 3 phases at 460…480 V
|
|
IcL starter rating |
12 A
|
|
utilisation category |
AC-53B conforming to EN/IEC 60947-4-2
|
|
current consumption |
60 A at nominal load
|
|
type of start |
Start with voltage ramp
|
|
power dissipation in W |
4 W at full load and at end of starting
124 W in transient state |
assembly style |
With heat sink
|
|
---|---|---|
function available |
Integrated bypass
|
|
supply voltage limits |
414…528 V
|
|
supply frequency |
50…60 Hz – 5…5 %
|
|
network frequency |
47.5…63 Hz
|
|
output voltage |
<= power supply voltage
|
|
[Uc] control circuit voltage |
Built into the starter
|
|
starting time |
Adjustable from 1 to 10 s
|
|
deceleration time symb |
Adjustable from 1 to 10 s
|
|
starting torque |
30…80 % of starting torque of motor connected directly on the line supply
|
|
discrete input type |
Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
|
|
discrete input voltage |
24…40 V
|
|
discrete input logic |
Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
|
|
discrete output current |
2 A DC-13
3 A AC-15 |
|
discrete output type |
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO |
|
discrete output voltage |
24 V (voltage limits: 6…30 V) open collector logic
|
|
minimum switching current |
10 mA at 6 V DC for relay outputs
|
|
maximum switching current |
Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
|
display type |
1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached |
|
tightening torque |
1.9…2.5 N.m
0.5 N.m |
|
electrical connection |
4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit
Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit |
|
marking |
CE
|
|
operating position |
Vertical +/- 10 degree
|
|
height |
124 mm
|
|
width |
45 mm
|
|
depth |
131 mm
|
|
net weight |
0.42 kg
|
|
compatibility code |
ATS01N2
|
Reviews
There are no reviews yet.