| range of product |
Altivar Machine ATV340
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product specific application |
Machine
|
|
| variant |
Standard version
|
|
| mounting mode |
Wall mount
|
|
| communication port protocol |
Modbus TCP
Modbus serial Ethernet/IP |
|
| option card |
Communication module, Profibus DP V1
Communication module, Profinet Communication module, DeviceNet Communication module, CANopen Communication module, EtherCAT |
|
| network number of phases |
3 phases
|
|
| supply frequency |
50…60 Hz +/- 5 %
|
|
| [Us] rated supply voltage |
380…480 V – 15…10 %
|
|
| nominal output current |
88.0 A
|
|
| motor power kW |
55 kW for normal duty
45 kW for heavy duty |
|
| motor power hp |
75 hp for normal duty
60 hp for heavy duty |
|
| EMC filter |
Class C3 EMC filter integrated
|
|
| IP degree of protection |
IP20
|
|
| degree of protection |
UL type 1
|
| discrete input number |
8
|
|
|---|---|---|
| discrete input type |
PTI safe torque off: 0…30 kHz, 24 V DC (30 V)
DI1…DI5 programmable as pulse input, 24 V DC (30 V), impedance: 3.5 kOhm programmable |
|
| number of preset speeds |
16 preset speeds
|
|
| discrete output number |
1.0
|
|
| discrete output type |
Programmable output DQ1, DQ2 30 V DC 100 mA
|
|
| analogue input number |
3
|
|
| analogue input type |
AI1 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits
AI1 software-configurable temperature probe or water level sensor AI1 software-configurable voltage: 0…10 V DC, impedance: 31.5 kOhm, resolution 12 bits AI2 software-configurable voltage: – 10…10 V DC, impedance: 31.5 kOhm, resolution 12 bits |
|
| analogue output number |
2
|
|
| analogue output type |
Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1, AQ2: 0…20 mA impedance 500 Ohm, resolution 10 bits |
|
| relay output number |
3
|
|
| output voltage |
<= power supply voltage
|
|
| relay output type |
Relay outputs R1A
Relay outputs R1C electrical durability 100000 cycles Relay outputs R2A Relay outputs R2C electrical durability 100000 cycles |
|
| maximum switching current |
Relay output R1C on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1C on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2C on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2C on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
|
| minimum switching current |
Relay output R1B: 5 mA at 24 V DC
Relay output R2C: 5 mA at 24 V DC |
|
| physical interface |
2-wire RS 485
|
|
| connector type |
3 RJ45
|
|
| method of access |
Slave Modbus RTU
Slave Modbus TCP |
|
| transmission rate |
4.8 kbit/s
9.6 kbit/s 19.2 kbit/s 38.4 kbit/s |
|
| transmission frame |
RTU
|
|
| number of addresses |
1…247
|
|
| data format |
8 bits, configurable odd, even or no parity
|
|
| type of polarization |
No impedance
|
|
| 4 quadrant operation possible |
True
|
|
| asynchronous motor control profile |
Constant torque standard
Optimized torque mode Variable torque standard |
|
| synchronous motor control profile |
Reluctance motor
Permanent magnet motor |
|
| pollution degree |
2 conforming to EN/IEC 61800-5-1
|
|
| maximum output frequency |
0.599 kHz
|
|
| acceleration and deceleration ramps |
S, U or customized
Linear adjustable separately from 0.01…9999 s |
|
| motor slip compensation |
Not available in permanent magnet motor law
Can be suppressed Adjustable Automatic whatever the load |
|
| switching frequency |
1…8 kHz adjustable
2.5…8 kHz with derating factor |
|
| nominal switching frequency |
2.5 kHz
|
|
| braking to standstill |
By DC injection
|
|
| brake chopper integrated |
True
|
|
| line current |
97.2 A at 380 V (normal duty)
84.2 A at 480 V (normal duty) 81.4 A at 380 V (heavy duty) 71.8 A at 480 V (heavy duty) |
|
| line current |
97.2 A at 380 V with internal line choke (normal duty)
84.2 A at 480 V with internal line choke (normal duty) 81.4 A at 380 V with internal line choke (heavy duty) 71.8 A at 480 V with internal line choke (heavy duty) 81.4 A 71.8 A |
|
| maximum input current |
97.2 A
|
|
| maximum output voltage |
480 V
|
|
| apparent power |
70 kVA at 480 V (normal duty)
59.7 kVA at 480 V (heavy duty) |
|
| maximum transient current |
127.2 A during 60 s (normal duty)
132 A during 60 s (heavy duty) 127.2 A during 2 s (normal duty) 132 A during 2 s (heavy duty) |
|
| electrical connection |
Screw terminal, clamping capacity: 0.75…1.5 mm² for control
Screw terminal, clamping capacity: 70…120 mm² for line side Screw terminal, clamping capacity: 70…120 mm² for DC bus Screw terminal, clamping capacity: 70…120 mm² for motor |
|
| prospective line Isc |
50 kA
|
|
| base load current at high overload |
88.0 A
|
|
| base load current at low overload |
106.0 A
|
|
| power dissipation in W |
Natural convection: 105 W at 380 V, switching frequency 4 kHz (heavy duty)
Forced convection: 943 W at 380 V, switching frequency 4 kHz (heavy duty) Natural convection: 115 W at 380 V, switching frequency 4 kHz (normal duty) Forced convection: 917 W at 380 V, switching frequency 4 kHz (normal duty) |
|
| electrical connection |
Control: screw terminal0.75…1.5 mm²/AWG 18…AWG 16
Line side: screw terminal70…120 mm²/AWG 1/0…250 kcmil DC bus: screw terminal70…120 mm²/AWG 1/0…250 kcmil Motor: screw terminal70…120 mm²/AWG 1/0…250 kcmil |
|
| with safety function Safely Limited Speed (SLS) |
True
|
|
| with safety function Safe brake management (SBC/SBT) |
True
|
|
| with safety function Safe Operating Stop (SOS) |
False
|
|
| with safety function Safe Position (SP) |
False
|
|
| with safety function Safe programmable logic |
False
|
|
| with safety function Safe Speed Monitor (SSM) |
False
|
|
| with safety function Safe Stop 1 (SS1) |
True
|
|
| with sft fct Safe Stop 2 (SS2) |
False
|
|
| with safety function Safe torque off (STO) |
True
|
|
| with safety function Safely Limited Position (SLP) |
False
|
|
| with safety function Safe Direction (SDI) |
False
|
|
| protection type |
Thermal protection: motor
Safe torque off: motor Motor phase loss: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent: drive Output overcurrent between motor phase and earth: drive Output overcurrent between motor phases: drive Short-circuit between motor phase and earth: drive Short-circuit between motor phases: drive Motor phase loss: drive DC Bus overvoltage: drive Line supply overvoltage: drive Line supply undervoltage: drive Input supply loss: drive Exceeding limit speed: drive Break on the control circuit: drive |
|
| width |
271.0 mm
|
|
| height |
908.0 mm
|
|
| depth |
309.0 mm
|
|
| net weight |
56.4 kg
|
|
| continuous output current |
106 A at 4 kHz for normal duty
88 A at 4 kHz for heavy duty |
Reviews
There are no reviews yet