Sale!
Variable Speed Drives
ATV610D75N4 Variable speed drive ATV610, 75 kW/100 HP, 380…415 V, IP20
Original price was: ₦6,175,722.63.₦4,940,578.10Current price is: ₦4,940,578.10. 7.5% VAT
Variable speed drive ATV610, 75 kW/100 HP, 380…415 V, IP20
| range of product |
Easy Altivar 610
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product specific application |
Fan, pump, compressor, conveyor
|
|
| device short name |
ATV610
|
|
| variant |
Standard version
|
|
| product destination |
Asynchronous motors
|
|
| mounting mode |
Cabinet mount
|
|
| EMC filter |
Integrated conforming to EN/IEC 61800-3 category C3 with 50 m
|
|
| IP degree of protection |
IP20
|
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50…60 Hz +/-5 %
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
380…415 V – 15…10 %
|
|
| motor power kW |
75 kW for normal duty
55 kW for heavy duty |
|
| motor power hp |
100 hp for normal duty
75 hp for heavy duty |
|
| line current |
147.9 A at 380 V (normal duty)
139 A at 415 V (normal duty) 115.8 A at 380 V (heavy duty) 110 A at 415 V (heavy duty) |
|
| prospective line Isc |
22 kA
|
|
| apparent power |
99.9 kVA at 415 V (normal duty)
79.1 kVA at 415 V (heavy duty) |
|
| continuous output current |
145 A at 2.5 kHz for normal duty
106 A at 2.5 kHz for heavy duty |
|
| maximum transient current |
160 A during 60 s (normal duty)
159 A during 60 s (heavy duty) |
|
| asynchronous motor control profile |
Constant torque standard
Optimized torque mode Variable torque standard |
|
| Output frequency |
0.0001…0.5 kHz
|
|
| nominal switching frequency |
2.5 kHz
|
|
| switching frequency |
1…8 kHz adjustable
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Modbus serial
|
|
| option card |
Slot A: communication card, Profibus DP V1
Slot A: digital or analog I/O extension card Slot A: relay output card |
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Automatic whatever the load
Can be suppressed Adjustable Not available in permanent magnet motor law |
|
| acceleration and deceleration ramps |
S, U or customized
Linear adjustable separately from 0.01 to 9000 s |
|
| braking to standstill |
By DC injection
|
|
| protection type |
Thermal protection: motor
Motor phase break: motor Thermal protection: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive |
|
| frequency resolution |
Display unit: 0.1 Hz
Analog input: 0.012/50 Hz |
|
| electrical connection |
Control, screw terminal: 0.5…1.5 mm²
Line side, screw terminal: 95…120 mm² Motor, screw terminal: 95…120 mm² |
|
| connector type |
1 RJ45 (on the remote graphic terminal) for Modbus serial
|
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| number of addresses |
1…247 for Modbus serial
|
|
| method of access |
Slave
|
|
| supply |
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
|
| local signalling |
2 LEDs for local diagnostic
1 LED (yellow) for embedded communication status 2 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage |
|
| width |
290 mm
|
|
| height |
762 mm
922 mm with EMC plate |
|
| depth |
323 mm
|
|
| net weight |
53.7 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits AI2, AI3 software-configurable temperature probe or water level sensor |
|
| discrete input number |
6
|
|
| discrete input type |
DI1…DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm
DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) |
|
| input compatibility |
DI1…DI6: logic input level 1 PLC conforming to EN/IEC 61131-2
DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68 |
|
| discrete input logic |
Positive logic (source): DI1…DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1)
Negative logic (sink): DI1…DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1) Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1) |
|
| analogue output number |
2
|
|
| analogue output type |
Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits
Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits |
|
| sampling duration |
5 ms +/- 0.1 ms (AI1, AI2, AI3) – analog input
2 ms +/- 0.5 ms (DI1…DI6)configurable – discrete input 5 ms +/- 1 ms (DI5, DI6)configurable – pulse input 10 ms +/- 1 ms (AQ1, AQ2) – analog output |
|
| accuracy |
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
|
| linearity error |
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AQ1, AQ2: +/- 0.2 % for analog output |
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
|
| refresh time |
Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3: 5 mA at 24 V DC
|
|
| maximum switching current |
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
|
| isolation |
Between power and control terminals
|
|
| insulation resistance |
> 1 MOhm 500 V DC for 1 minute to earth
|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
Variable Speed DrivesATV12P037M2 Variable speed drive ATV12 – 0.37kW – 0.55hp – 200..240V – 1ph – with heat sink
Original price was: ₦358,664.13.₦286,931.30Current price is: ₦286,931.30. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12H018M2 Variable speed drive ATV12 – 0.18kW – 0.25hp – 200..240V – 1ph
Original price was: ₦310,816.38.₦248,653.10Current price is: ₦248,653.10. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12P055M2 Variable speed drive ATV12 – 0.55 kW – 0.75hp – 200..240V – 1ph – on base plate
Original price was: ₦400,359.38.₦320,287.50Current price is: ₦320,287.50. 7.5% VAT Add to basket -
Sale!
Variable Speed DrivesATV12P075M3 Variable speed drive ATV12 – 0.75kW – 1hp – 200..240V – 3ph – on base plate
Original price was: ₦489,375.00.₦391,500.00Current price is: ₦391,500.00. 7.5% VAT Add to basket
Reviews
There are no reviews yet.