ATV650D11N4 Variable speed drive, ATV650, 11 kW, 400…480V, IP55

Altivar Process ATV600

Variable speed drive

Process and utilities

ATV650

Standard version

Asynchronous motors
Asynchronous motors

Integrated with 50 m conforming to EN/IEC 61800-3 category C2

IP54 conforming to IEC 60529
IP55 conforming to IEC 61800-5-1

Forced convection

50…60 Hz – 5…5 %

3 phases

380…480 V – 15…10 %

7.5 kW (heavy duty)
11 kW (normal duty)

10 hp heavy duty
15 hp normal duty

19.8 A at 380 V (normal duty)
17 A at 480 V (normal duty)
14.1 A at 380 V (heavy duty)
12.5 A at 480 V (heavy duty)

50 kA

10.4 kVA at 480 V (heavy duty)
14.1 kVA at 480 V (normal duty)

16.5 A at 2.5 kHz for heavy duty
23.5 A at 4 kHz for normal duty

24.8 A during 60 s (heavy duty)
25.9 A during 60 s (normal duty)

Constant torque standard
Optimized torque mode
Optimized torque mode

Synchronous reluctance motor
Permanent magnet motor

0.0001…0.5 kHz

0.1…599 Hz

4 kHz

2…8 kHz adjustable
2…12 kHz adjustable

STO (safe torque off) SIL 3

16 preset speeds

Modbus TCP
Ethernet
Ethernet

Slot A: communication module, Profinet
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Slot A: communication module, Profibus DP V1

<= power supply voltage

1.5 x In during 60 s (heavy duty)
1.1 x In during 60 s (normal duty)

Not available in permanent magnet motor law
Can be suppressed
Automatic whatever the load
Can be suppressed

Linear adjustable separately from 0.01…9999 s

By DC injection

Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Thermal protection: motor

Analog input: 0.012/50 Hz
Display unit: 0.1 Hz

Line side: M12 bar – 3 cables 3 x 185 mm² maximum per phase (normal duty)
Line side: M12 bar – 4 cables 3 x 120 mm² maximum per phase (normal duty)
Motor: M12 bar – 3 cables 3 x 185 mm² maximum per phase (normal duty)
Motor: M12 bar – 4 cables 3 x 120 mm² maximum per phase (normal duty)
Line side: M12 bar – 3 cables 3 x 185 mm² maximum per phase (heavy duty)
Line side: M12 bar – 4 cables 3 x 120 mm² maximum per phase (heavy duty)
Motor: M12 bar – 3 cables 3 x 185 mm² maximum per phase (heavy duty)
Motor: M12 bar – 4 cables 3 x 120 mm² maximum per phase (heavy duty)
Line side: M12 bar – 3 cables 3 x 150 mm² minimum per phase (normal duty)
Line side: M12 bar – 4 cables 3 x 95 mm² minimum per phase (normal duty)
Motor: M12 bar – 2 cables 3 x 185 mm² minimum per phase (normal duty)
Motor: M12 bar – 3 cables 3 x 120 mm² minimum per phase (normal duty)
Line side: M12 bar – 2 cables 3 x 185 mm² minimum per phase (heavy duty)
Line side: M12 bar – 3 cables 3 x 95 mm² minimum per phase (heavy duty)
Motor: M12 bar – 2 cables 3 x 185 mm² minimum per phase (heavy duty)
Motor: M12 bar – 3 cables 3 x 120 mm² minimum per phase (heavy duty)
Control: removable screw terminals0.5…1.5 mm²/AWG 20…AWG 16

RJ45 (on the remote graphic terminal) for Modbus serial
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP

2-wire RS 485 for Modbus serial

RTU for Modbus serial

4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
10/100 Mbit/s for Ethernet IP/Modbus TCP

Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

8 bits, configurable odd, even or no parity for Modbus serial

No impedance for Modbus serial

1…247 for Modbus serial

Slave Modbus TCP

Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection

3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
3 LEDs for local diagnostic

264 mm

678 mm

299 mm

13.7 kg

3

AI1, AI2, AI3 software-configurable current: 0…20 mA/4…20 mA, impedance: 250 Ohm, resolution 12 bits
AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits

8

DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
DI1…DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm

DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI1…DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2

Negative logic (sink) (DI1…DI6), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
Positive logic (source) (DI1…DI6), < 5 V (state 0), > 11 V (state 1)

2

Software-configurable current AO1, AO2: 0…20 mA, resolution 10 bits
Software-configurable voltage AO1, AO2: 0…10 V DC impedance 470 Ohm, resolution 10 bits

5 ms +/- 1 ms (DI5, DI6) – discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) – analog input
10 ms +/- 1 ms (AO1) – analog output
2 ms +/- 0.5 ms (DI1…DI4) – discrete input

+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input

AO1, AO2: +/- 0.2 % for analog output
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input

3

Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles

Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)

Relay output R1, R2, R3: 5 mA at 24 V DC

Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC

Between power and control terminals

Other application Food and beverage processing
Fan Mining mineral and metal
Pump Mining mineral and metal
Fan Oil and gas
Other application Water and waste water
Screw compressor Building – HVAC
Pump Food and beverage processing
Fan Food and beverage processing
Atomization Food and beverage processing
Electro submersible pump (ESP) Oil and gas
Water injection pump Oil and gas
Jet fuel pump Oil and gas
Compressor for refinery Oil and gas
Centrifuge pump Water and waste water
Positive displacement pump Water and waste water
Electro submersible pump (ESP) Water and waste water
Screw pump Water and waste water
Lobe compressor Water and waste water
Screw compressor Water and waste water
Compressor centrifugal Water and waste water
Fan Water and waste water
Conveyor Water and waste water
Mixer Water and waste water
Compressor centrifugal Building – HVAC

250…500 kW at 480…500 V 3 phases
7…11 kW at 380…440 V 3 phases

Wall mount