Sale!
EasyLogic Meters
METSEPM1130HCL05RS EASYLOGIC PM1130H DUAL P&E RLY RS CL 0.5
Original price was: ₦207,562.50.₦166,050.00Current price is: ₦166,050.00. 7.5% VAT
EASYLOGIC PM1130H DUAL P&E RLY RS CL 0.5
| range |
EasyLogic
|
|
|---|---|---|
| product name |
EasyLogic PM11XXH RS
|
|
| device short name |
PM1130H
|
|
| product or component type |
Dual source energy meter
|
| power quality analysis |
total harmonic distortion
|
|
|---|---|---|
| device application |
Energy monitoring
Main or redundant power monitoring |
|
| type of measurement |
Current
Voltage Frequency Power factor Phase angle RPM Peak demand power Harmonic distorsion (I THD & U THD) Active power Active energy |
|
| metering type |
Unbalance current
Power factor and displacement PF (signed, four quadrant) Reactive power Q, Q1, Q2, Q3 Average current Iavg Active, reactive, apparent energy (signed, two quadrant) Active power P, P1, P2, P3 Frequency Calculated neutral current Voltage U21, U32, U13, V1, V2, V3 Unbalance voltage Rotation speed Demand power P, Q, S Phase currents Apparent power S, S1, S2, S3 Phase current I1, I2, I3 RMS Average voltage Vavg |
|
| counter functions |
ON-load source 1 hour counting
ON hour counting ON-load source 2 hour counting Power interruption |
|
| [Us] rated supply voltage |
48…277 V AC 45…65 Hz
48…277 V DC |
|
| network frequency |
60 Hz
50 Hz |
|
| [In] rated current |
5 A
1 A |
|
| type of network |
2P
2P + N 3P 1P + N 3P + N |
|
| maximum power consumption in VA |
4 VA at 240 V between phase and neutral
|
|
| maximum power consumption in W |
2 W at 240 V
|
|
| display type |
7 segments LED
|
|
| display colour |
Red
|
|
| messages display capacity |
3 fields of 4 characters
|
|
| display digits |
12 digit(s) – 14.2 mm in height
|
|
| communication of data |
Last cleared log
Reading of measurements All counters Revolution speed Instantaneous and demand values |
|
| tamperproof of settings |
Protected by access code
|
|
| sampling rate |
32 samples/cycle
|
|
| measurement current |
5…6000 mA
|
|
| Signal |
Voltage (impedance 5 MOhm)4 x
Current 0.005…10 A (impedance 0.3 MOhm)6 x |
|
| measurement voltage |
35…480 V AC 50…60 Hz between phases
35…277 V AC 50…60 Hz between phase and neutral 277…999000 V AC 50…60 Hz with external VT |
|
| frequency measurement range |
45…65 Hz
|
|
| measurement accuracy |
Current +/- 0.5 %
Voltage +/- 0.5 % Frequency +/- 0.05 % Power factor +/- 0.01 Reactive power +/- 2 % Reactive energy +/- 2 % Active power +/- 0.5 % Apparent power +/- 0.5 % Active energy +/- 0.5 % Apparent energy +/- 0.5 % Harmonic distorsion (I THD & U THD) +/- 5 % |
|
| accuracy class |
Class 2 reactive energy conforming to IEC 62053-23
Class 0.5 active energy conforming to IEC 62053-22 |
|
| number of outputs |
1 relay
|
|
| output voltage |
300 V AC@2 A
|
|
| Demand intervals |
1 s
|
|
| local signalling |
Green LED: activity
Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) Red LED: alternate source |
|
| communication port protocol |
Modbus at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2 wires, insulation 2500 V
|
|
| communication port support |
RS485
|
|
| data recording |
Energy consumption logs
|
|
| material |
Polycarbonate
|
|
| flame retardance |
V-0 conforming to UL 94
|
|
| mounting mode |
Flush-mounted
|
|
| mounting support |
Framework
|
|
| provided equipment |
Installation guide
|
|
| installation category |
III
|
|
| type of installation |
Indoor installation
|
|
| measurement category |
Category III 480 V
|
|
| electrical insulation class |
Class II
|
|
| connections – terminals |
Current circuit: screw clamp terminals (bottom) 2.08…3.31 mm² cable(s)
Voltage circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) Control circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) Communication: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) Secondary circuit: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) Relay output: screw clamp terminals (rear) 0.33…3.31 mm² cable(s) |
|
| tightening torque |
Current circuit: 0.9…1 N.m Philips No 2 screwdriver
Voltage circuit: 0.9…1 N.m Philips No 2 screwdriver Control circuit: 0.9…1 N.m Philips No 2 screwdriver Communication: 0.5…0.6 N.m Philips no 1 screwdriver Secondary circuit: 0.5…0.6 N.m Philips no 1 screwdriver Relay output: 0.5…0.6 N.m Philips no 1 screwdriver |
|
| wire stripping length |
Current circuit: 3.68 mm
Voltage circuit: 7 mm Control circuit: 7 mm Communication: 7 mm 7 mm |
|
| standards |
IEC 61010-1:ed. 3
UL 61010-1:ed. 3 |
|
| product certifications |
CE conforming to IEC 61010-1
CULus conforming to UL 61010-1 CULus conforming to CSA C22.2 No 61010-1 C-Tick |
|
| width |
96 mm
|
|
| depth |
13 mm outside:
52 mm panel: |
|
| height |
96 mm
|
|
| net weight |
300 g
|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
EasyLogic MetersMETSEDM3110 EasyLogic – Digital Panel Meter DM3000 – Ampermeter – three phases
Original price was: ₦53,648.75.₦42,919.00Current price is: ₦42,919.00. 7.5% VAT Add to basket -
Sale!
EasyLogic MetersMETSEPM2KANLGIO22 EasyLogic PM2X30 – I/O Module – Analogue – 2 inputs + 2 outputs
Original price was: ₦160,523.75.₦128,419.00Current price is: ₦128,419.00. 7.5% VAT Add to basket -
Sale!
EasyLogic MetersMETSEPM2130 EasyLogic PM2130, Power & Energy meter, up to the 31st harmonic, LED display, RS485, class 0.5S
Original price was: ₦374,906.25.₦299,925.00Current price is: ₦299,925.00. 7.5% VAT Add to basket -
Sale!
EasyLogic MetersMETSEPM2KANLGIO11 EasyLogic PM2X30 – I/O Module – Analogue – 1 input + 1 output
Original price was: ₦126,141.25.₦100,913.00Current price is: ₦100,913.00. 7.5% VAT Add to basket
Reviews
There are no reviews yet.