Sale!

ATS01N212RT Soft starter for asynchronous motor – ATS01 – 12 A – 460..480 V

226,159.00 7.5% VAT

Soft starter for asynchronous motor – ATS01 – 12 A – 460..480 V

SKU: ATS01N212RT Category:
Main
range of product
Altistart 01
product or component type
Soft starter
product destination
Asynchronous motors
product specific application
Simple machine
device short name
ATS01
network number of phases
3 phases
[Us] rated supply voltage
460…480 V – 10…10 %
motor power hp
7.5 hp, 3 phases at 460…480 V
IcL starter rating
12 A
utilisation category
AC-53B conforming to EN/IEC 60947-4-2
current consumption
60 A at nominal load
type of start
Start with voltage ramp
power dissipation in W
4 W at full load and at end of starting
124 W in transient state
Complementary
assembly style
With heat sink
function available
Integrated bypass
supply voltage limits
414…528 V
supply frequency
50…60 Hz – 5…5 %
network frequency
47.5…63 Hz
output voltage
<= power supply voltage
[Uc] control circuit voltage
Built into the starter
starting time
Adjustable from 1 to 10 s
deceleration time symb
Adjustable from 1 to 10 s
starting torque
30…80 % of starting torque of motor connected directly on the line supply
discrete input type
Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
discrete input voltage
24…40 V
discrete input logic
Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current
2 A DC-13
3 A AC-15
discrete output type
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
discrete output voltage
24 V (voltage limits: 6…30 V) open collector logic
minimum switching current
10 mA at 6 V DC for relay outputs
maximum switching current
Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type
1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
tightening torque
1.9…2.5 N.m
0.5 N.m
electrical connection
4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit
Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit
Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit
Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit
Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit
4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit
Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
marking
CE
operating position
Vertical +/- 10 degree
height
124 mm
width
45 mm
depth
131 mm
net weight
0.42 kg
compatibility code
ATS01N2

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.