Sale!

METSEDM6000HCL10NC EASYLOGIC DM6200H VAF PF DPM NONC CL1.0

49,145.00 7.5% VAT

EASYLOGIC DM6200H VAF PF DPM NONC CL1.0

 

SKU: METSEDM6000HCL10NC Category:
Main
range
EasyLogic
product name
EasyLogic DM6X00H NC
device short name
DM6000H
product or component type
VAF PF meter
Complementary
device application
Remote monitoring
type of measurement
Current
Voltage
Frequency
RPM
metering type
Unbalance current
Calculated neutral current
Unbalance voltage
Rotation speed
Phase currents
Voltage U21, U32, U13, V1, V2, V3
Frequency
Average voltage Vavg
Average current Iavg
counter functions
Power interruption
ON hour counting
[Us] rated supply voltage
48…277 V AC 45…65 Hz
48…277 V DC
network frequency
50 Hz
60 Hz
[In] rated current
1 A
5 A
type of network
2P + N
2P
3P + N
3P
1P + N
maximum power consumption in VA
4 VA at 240 V between phase and neutral
maximum power consumption in W
2 W at 240 V
display type
8 segments LED
display colour
Red
messages display capacity
3 fields of 4 characters
display digits
12 digit(s) – 14.2 mm in height
communication of data
Reading of measurements
Instantaneous and demand values
Revolution speed
All counters
tamperproof of settings
Protected by access code
sampling rate
32 samples/cycle
measurement current
5…6000 mA
Signal
Current 0.005…10 A (impedance 0.3 MOhm)6 x
measurement voltage
35…480 V AC 50…60 Hz between phases
46…277 V AC 50…60 Hz between phase and neutral
277…999000 V AC 50…60 Hz with external VT
frequency measurement range
45…65 Hz
measurement accuracy
Frequency +/- 0.05 %
Power factor +/- 0.01
Current +/- 1 %
Voltage +/- 1 %
accuracy class
Class 1
Demand intervals
1 s
local signalling
Green LED: activity
Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh)
communication port protocol
material
Polycarbonate
flame retardance
V-0 conforming to UL 94
mounting mode
Flush-mounted
mounting support
Framework
installation category
III
type of installation
Indoor installation
measurement category
Category III 480 V
electrical insulation class
Class II
connections – terminals
Current circuit: screw clamp terminals (bottom) 2.08…3.31 mm² cable(s)
Voltage circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s)
Control circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s)
tightening torque
Current circuit: 0.9…1 N.m Philips No 2 screwdriver
Voltage circuit: 0.9…1 N.m Philips No 2 screwdriver
Control circuit: 0.9…1 N.m Philips No 2 screwdriver
wire stripping length
Current circuit: 3.68 mm
Voltage circuit: 7 mm
Control circuit: 7 mm
standards
IEC 61010-1:ed. 3
UL 61010-1:ed. 3
product certifications
CE conforming to IEC 61010-1
CULus conforming to UL 61010-1
CULus conforming to CSA C22.2 No 61010-1
C-Tick
width
96 mm
depth
13 mm outside:
49 mm panel:
height
96 mm
net weight
300 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.